Heavy Equipment
Wheel Loaders
| 950H Wheel Loader |
950H Technical Data
Specifications below are provided online by Caterpillar.
| Engine | |
|---|---|
| Net Power - ISO 9249 | 147 kW / 197 hp |
| Engine Model | Cat® C7 ACERT™ |
| Net Power - 80/1269/EEC | 147 kW / 197 hp |
| Flywheel Power | 147 kW / 197 hp |
| Gross Power - SAE J1995 | 162 kW / 217 hp |
| Net Power - SAE J1349 | 145 kW / 195 hp |
| Peak Torque (Net) @ 1,400 RPM | 907 N·m / 669 ft-lb |
| Bore | 110 mm / 4.33 in |
| Stroke | 127 mm / 5 in |
| Displacement | 7.2 L / 439 in³ |
| Weights | |
|---|---|
| Operating Weight | 18338 kg / 40435 lb |
| Buckets | |
|---|---|
| Bucket Capacities | 2.5-3.5 m³ 3.25-4.5 yd³ |
| Max Bucket Capacity | 3.5 m³ / 4.5 yd³ |
| Bucket Width | 2927 mm / 9.6 ft |
| Capacity - Reference bucket | 3.1 m³ / 4 yd³ |
| Type - Reference bucket | General purpose |
| Breakout force of Reference bucket | 165 kN / 37125 lb |
| Operating Specifications | |
|---|---|
| Dump Clearance | 2.922 m / 9.59 ft |
| Breakout Force | 165 kN / 37125 lb |
| Static Tipping Load, Full Turn - Bucket | 10915 kg / 24068 lb |
| Static Tipping Load, Full Turn - Forks | 4273 kg / 9421 lb |
| Transmission | |
|---|---|
| Forward 1 | 6.9 km/h / 4.3 mph |
| Forward 2 | 12.7 km/h / 7.9 mph |
| Forward 3 | 22.3 km/h / 13.9 mph |
| Forward 4 | 37 km/h / 23 mph |
| Reverse 1 | 7.6 km/h / 4.7 mph |
| Reverse 2 | 13.9 km/h / 8.6 mph |
| Reverse 3 | 24.5 km/h / 15.2 mph |
| Reverse 4 | 40 km/h / 24.9 mph |
| Hydraulic System | |
|---|---|
| Steering System Pump Type | Piston |
| Hydraulic Cycle Time - Raise | 6.2 Seconds / 6.2 Seconds |
| Hydraulic Cycle Time - Dump | 1.3 Seconds / 1.3 Seconds |
| Hydraulic Cycle Time - Lower, Empty, Float Down | 2.5 Seconds / 2.5 Seconds |
| Hydraulic Cycle Time - Total | 10 Seconds / 10 Seconds |
| Axles | |
|---|---|
| Front | Fixed front |
| Rear | Oscillating +/- 13° |
| Maximum Single-Wheel Rise and Fall | 470 mm / 18.5 in |
| Service Refill Capacities | |
|---|---|
| Fuel Tank - Standard | 314 L / 83 gal |
| Cooling System | 42 L / 11 gal |
| Crankcase | 30 L / 7.9 gal |
| Transmission | 34 L / 9 gal |
| Differentials and Final Drives - Front | 36 L / 9.5 gal |
| Differentials and Final Drives - Rear | 36 L / 9.5 gal |
| Hydraulic Tank | 110 L / 29 gal |
| Dimensions | |
|---|---|
| Height to top of ROPS | 3444.3 mm / 11.3 ft |
| Height to top of exhaust pipe | 3369 mm / 11.05 ft |
| Height to top of hood | 2462 mm / 8.08 ft |
| Ground clearance | 412 mm / 1.35 ft |
| B-pin height - standard | 3992 mm / 13.1 ft |
| B-pin height - high-lift | 4490 mm / 14.73 ft |
| Center line rear axle to edge of counterweight | 1955 mm / 6.41 ft |
| Wheelbase | 3350 mm / 10.99 ft |
| B-pin height at carry - standard | 455 mm / 1.49 ft |
| B-pin height at carry - high-lift | 591 mm / 1.94 ft |
| Center line rear axle to hitch | 1675 mm / 5.5 ft |
| Rack back at maximum lift | 59.5 Degrees / 59.5 Degrees |
| Dump angle at maximum lift | 48.2 Degrees / 48.2 Degrees |
| Rack back at carry | 45 Degrees / 45 Degrees |
| Rack back at ground | 38.5 Degrees / 38.5 Degrees |
| Height to center line of axle | 748 mm / 2.45 ft |